Five-section main boom with a full extension length of 36.6 m; basic boom length is 9.35 m. The boom features a U-shaped cross-section (X-shaped or U-shaped boom).
Overall vehicle dimensions: length 11.06 m, width 2.5 m, height 3.26 m.
The upper structure comes standard with a single-cooling air conditioner, a hydraulic oil radiator, and a fifth outrigger.
The auxiliary hook can lift a load of 2.7 tons at idle speed.
Working Radius (m)
Boom (m)
9.35
14.8
20.25
25.7
31.15
36.6
3.0
16000
3.5
16000
4.0
16000
4.5
15800
9000
5.0
13700
9000
8200
5.5
11700
8800
7900
6500
6.0
10200
8500
7600
6300
5000
6.5
9800
8200
7400
6100
4800
7.0
9200
7800
6900
5900
4600
3000
7.5
7400
6600
5600
4300
2900
8.0
7000
6200
5300
4000
2800
9.0
6200
5800
5000
3600
2700
10.0
5100
5300
4500
3300
2600
12.0
3500
3800
3900
3000
2500
14.0
2400
2600
2600
2400
16.0
1800
1900
2000
2100
18.0
1600
1600
1650
20.0
1200
1250
1300
22.0
900
1000
24.0
800
Rate
6
6
5
4
3
3
Operation Instructions:
The rated lifting capacity in the table is the maximum total lifting capacity that the crane can guarantee on a flat and firm ground.
The rated lifting capacity in the table includes the weight of the lifting hook, sling, and the pay - out hoisting wire rope. The main hook weighs 183kg, and the auxiliary hook weighs 58kg.
The working radius in the table is the radius when the lifted load is off the ground, and it is an actual value including the deformation of the boom. Therefore, the deformation of the boom should be considered before lifting.
Operations are only permitted under wind force level 5 (with a wind speed of 14.1m/s and a wind pressure of 125Pa or below.
Telescoping the boom under load is not permitted.
The lifting performance of the single pulley at the boom tip is the same as that of the main boom, but the maximum lifting weight shall not exceed 2700kg.
Audited Supplier 
){kind=link}